Live 'Chalk Talk' - Optimizing Cooling Time in Injection Molding
Webinars
Start of the event:
20:00 p.m. (MESZ Berlin)
02:00 p.m. (EDT, North Carolina)
01:00 a.m. (ICT, Bangkok)
In this LIVE SESSION you will learn how to optimize cooling times with Moldex3D!!!
Cooling is the most time-consuming sequence in the injection molding cycle and selecting the "right" temperature control is becoming increasingly complex due to the increase in options. A reduction in the cooling time can help achieve significant savings. This live session will focus on Moldex3D’s cooling simulation capabilities. Attendees will learn how to use Moldex3D to predict potential molding problems such as hot spots, shrinkage, warping, residual stress, etc., and how to evaluate the effectiveness of different cooling channel designs. Join this live demo to learn more and see how Moldex3D Cooling Simulation can help you meet cycle time, part quality and lead time requirements.
Highlights:
_ Cooling Challenges in the Injection Molding Process
_ Moldex3D Cooling Analysis Capabilities
Digital platform:
_ MS Teams Live Event
_ For an easier technical handling, please use your professional email address to register. Thank you. In case of registration via Gmail, Hotmail, etc. accounts we reserve the right to check your participation.
Register now!
Registration deadline: 12.06.2023 at 5 p.m.
kostenfrei
Registration
Contact
Do you prefer the direct contact? We are happy to answer your questions on the phone.
+49 241 56 52 76-0If you have any questions regarding your registration, please contact our event department.
events@simpatec.com